In the battery industry, we often hear terms like battery, battery cell, module, and even battery pack. Many people are curious about the differences between these three terms. The truth is, battery is a general term, while cell, module, and pack represent different stages in battery application.
In a power battery pack, to safely and effectively manage the hundreds or even thousands of individual cells, they are not randomly placed within the battery casing but are organized into modules and packs. The smallest unit is the cell. A group of cells forms a module, and several modules form a lithium-ion battery pack. This article will detail the definition and types of cells, the differences between cells and batteries, and the steps involved in cell design.
What Is a Battery Cell?
A battery cell is the most basic component of a battery, typically an electrochemical device enclosed in a metal casing. It is the unit that stores and releases electrical energy, converting chemical energy into electrical energy through chemical reactions. A battery cell typically consists of a cathode, an anode, a separator, and an electrolyte.
The cathode and anode are the two polar ends of a battery cell, separated by a separator. Both the cathode and anode contain active materials and are typically the site of chemical reactions. The separator is an ion-permeable membrane that prevents direct contact between the cathode and anode but allows ions to flow between them. The electrolyte is a liquid or solid that acts as an ion transport medium, helping to maintain ion flow within the battery cell.
Types and Applications of Battery Cells
The type and construction of battery cells vary depending on the battery type and application. Common types include lithium-ion batteries, NiMH batteries, and lead-acid batteries. Battery cells are widely used in various electronic devices and applications, such as mobile phones, laptops, and electric vehicles. The performance and characteristics of battery cells have a significant impact on battery capacity, voltage, cycle life, and safety.
What Is the Difference Between a Cell and a Battery?
Cells and batteries are two different concepts in electrical energy storage and release devices. The differences between them are as follows:
Definition: A cell is the core component of a battery that carries out chemical reactions and stores electrical energy. It is typically composed of cathode and anode, an electrolyte, and a separator. A battery is a complete power supply device consisting of one or more cells, connectors, a circuit protection board, and a casing.
Function: A cell is the core of a battery responsible for converting chemical energy into electrical energy and releasing it when needed. It is essentially the key component of a battery’s storage and supply of electrical energy. A battery is an assembly of one or more cells that provides battery management, protection, and output functions, making it a standalone power source.
Structure: Battery cells are typically made in cylindrical, prismatic, or pouch shapes. Different cell types have different structural designs, such as the 18650 cell commonly found in lithium-ion batteries. A battery combines cells with components such as connectors, protective circuitry, and a casing to form a complete power supply device.
Applications: Battery cells, as the core component of batteries, are widely used in various electronic devices and emergency power supplies, such as mobile phones, laptops, and electric vehicles. As independent power sources, batteries can more conveniently power various devices and systems, such as home energy storage systems and solar cell energy storage systems.
In summary, the battery cell is the core component of the battery responsible for storing and releasing electrical energy. A battery, consisting of the battery cell and its surrounding components, is a complete power supply unit that manages, protects, and outputs electrical energy. While the term “battery” is a more comprehensive concept, the battery cell is a crucial component.
Battery Cells vs Battery Modules vs Battery Packs: What Are the Differences?
Cell: A cell refers to a single electrochemical cell containing cathode and anode and is generally not used directly. Furthermore, the lifespan of the cell is also a critical factor. Damage to any single cell can damage the entire battery pack.
Module: A battery module can be understood as the intermediate product between the cell and the pack, formed by combining lithium-ion cells in series and parallel and adding individual battery monitoring and management devices. Its structure must support, secure, and protect the cells, and can be summarized into three major aspects: mechanical strength, electrical performance, thermal performance, and fault handling capabilities.
Battery Pack: A pack refers to the customized packaging, encapsulation, and assembly of lithium batteries. The main processes are divided into three major parts: processing, assembly, and packaging. When multiple modules are controlled or managed by a BMS and thermal management system, the unified whole is called a lithium battery pack.
Individual battery cells cannot be used. They can only be used directly by combining them together and adding protective circuitry and a protective casing. This is called a battery module. A battery module is composed of numerous battery cells. These cells undergo rigorous screening, and consistent cells are assembled according to precise design into modular battery modules. These modules are then equipped with individual battery monitoring and management devices.
“Cell-module-battery pack” is a micro-to-macroscopic sequence. Cells must be sophisticated to ensure the safety of modules, and thus of battery packs. “Battery pack-module-cell” is a macro-to-microscopic sequence. Even if the battery pack casing is damaged, the module casing can still provide protection. Even if the module casing is damaged, the cell itself can still protect itself.
The production process from a single battery cell to a battery pack is also quite complex, requiring multiple steps and is no less complex than the manufacturing process of the battery cell itself. Users who have not come into contact with lithium batteries generally regard the battery pack produced by lithium battery manufacturers as a large battery. In fact, the lithium batteries we use are actually the same as lead-acid batteries. They are also made by connecting individual cells in parallel and/or series.
Basic Process of Battery Cell Design
Define the cell's purpose and analyze requirements
Identify the application scenario: First, clarify the cell’s application area, such as electric vehicles (EVs), hybrid electric vehicles (HEVs), plug-in hybrid electric vehicles (PHEVs), consumer electronics (such as mobile phones and laptops), or energy storage systems. Different application scenarios place significant demands on the cell’s performance. For example, electric vehicles prioritize high energy density, long cycle life, and fast charging capabilities; whereas consumer electronics place higher demands on size, weight, and safety.
Performance specification analysis: Determine the cell’s performance requirements, including but not limited to voltage, capacity, energy density, power density, cycle life, self-discharge rate, charge/discharge rate, and operating temperature range. For example, electric vehicles may require the cell to operate within an ambient temperature range of -20°C to 50°C and possess a high charge/discharge rate to enable rapid charging and instantaneous high-current discharge.
Understanding space and structural requirements: Understanding the cell’s installation location and spatial constraints within the device will impact the cell’s shape, size, and packaging. For example, in some compact electronic products, the cell requires an ultra-thin or custom-shaped structure; in electric vehicle battery packs, the cell size and arrangement must adapt to the overall layout of the pack.
Performance design
Cell system type selection: Based on the cell’s application and overall requirements, determine the appropriate cell system type, such as lithium cobalt oxide, lithium manganese oxide, lithium iron phosphate, or ternary materials (nickel-cobalt-manganese or nickel-cobalt-aluminum). For example, lithium iron phosphate cells, due to their high safety and low cost, are commonly used in safety-critical energy storage applications and some electric vehicles. Ternary material cells, on the other hand, are favored by high-end electric vehicles seeking long driving ranges due to their high energy density.
Key parameter determination: Based on previous design experience, experimental data, and the performance of similar products on the market, determine key cell parameters such as the voltage platform and current density. For example, the voltage platform of a common ternary material cell is generally around 3.7V. By properly designing the electrode materials and formulation, the current density can be optimized, improving charge and discharge performance.
Material and component selection: Based on the determined key parameters and process requirements, select the appropriate separator, packaging bag/casing, cathode and anode materials, current collector, electrolyte, and tabs. The separator needs to have good ionic conductivity and mechanical strength to isolate the cathode and anode and prevent short circuits; the electrolyte formula must match the electrode material to ensure the stable electrochemical performance of the battery cell.
Structural design
Appearance and Dimension Planning: Based on the customer’s dimensional requirements, design the cell’s number of layers, winding or stacking structure, and tab placement. For wound cells, determine the number and method of winding; for stacked cells, plan the order and method of tab stacking.
Internal and External Structural Design: Based on the overall dimensional planning, design the dimensions of the pocket or housing to ensure the cell meets mechanical strength and protection requirements after packaging. Based on the cell thickness requirements, precisely determine the shape and dimensions of the core, which in turn determines the separator width, and the tab width and length. Furthermore, consider the connection method and reliability of the tabs to the external circuit.
Simulation analysis and optimization
Model building and simulation: Utilizing professional electrochemical simulation software and structural mechanics simulation software, the designed battery cell is modeled and simulated. Electrochemical simulation can simulate the electrochemical performance of the battery cell under different operating conditions, such as voltage changes and lithium ion diffusion during charge and discharge. Structural mechanics simulation can assess the structural reliability of the battery cell under external forces such as vibration and impact.
Design optimization and adjustment: Optimize and adjust the battery cell design based on the simulation results. If the simulation results indicate excessive cell temperatures during high-rate charge and discharge, the heat dissipation structure may need to be optimized or the electrolyte formulation adjusted. If the structure is found to be at risk of damage under certain impact conditions, the housing design may need to be enhanced or the internal structural layout may need to be modified.
Sample production and testing verification
Sample production: Produce battery cell samples according to the optimized design. During the production process, strictly control production process parameters to ensure sample quality and consistency.
Performance testing: Conduct comprehensive performance testing on the produced battery cell samples, including but not limited to capacity testing, charge and discharge performance testing, cycle life testing, safety performance testing (such as overcharge, over-discharge, short circuit, and puncture tests), and environmental adaptability testing (such as high and low temperature performance testing and humidity testing). Compare test results with design requirements to assess whether the battery cell meets the expected performance indicators.
Design improvement and finalization
Problem analysis and improvement: If testing reveals performance deficiencies or other issues with the battery cell, we will conduct in-depth analysis and refine the design and production process. This may involve adjusting the material formulation, optimizing the structural design, or resetting production process parameters.
Design finalization and mass production: After multiple refinements and testing, when the battery cell performance meets design requirements and is stable and reliable, we will finalize the design and enter mass production. During mass production, we will continuously monitor the cell quality and performance, and continuously optimize the production process.
Conclusion
A battery cell is the smallest unit of a battery. Multiple cells are combined to form a battery, storing and releasing electricity for applications such as electric vehicles, electric motorcycles, and energy storage, providing a stable and long-lasting energy supply.
The type of cell also affects battery performance and quality. Like batteries, there are multiple types of cells. Customers can select high-energy-density, high-performance cells based on their application requirements, combining them to produce high-performance batteries that provide sufficient and stable power to their equipment, ensuring normal operation.















