Three Battery Charging Modes You Should Know About

Battery Charging Modes
  • Whatsapp/Wechat: (+86)18925002618
  • Email: sales@atomemotor.com
  • Headquarters: Washington Business Park 7 Washington Drive Unit 25 Halfway House Midrand
Table of Contents
    Add a header to begin generating the table of contents

    When you connect an electric car to a charging station, the seemingly simple charging process is actually a sophisticated exercise in energy management. Constant current charging, constant voltage charging, and trickle charging—these three battery charging modes act like dedicated butlers for the battery, each performing its own function at different stages to ensure rapid battery replenishment without compromising battery life.

    This article will provide an in-depth understanding of the control logic behind these three battery charging modes and uncover the technological secrets behind the charging process.

    YouTube_play_button

    Why Do Batteries Need Multiple Charging Modes?

    Batteries are like picky eaters, requiring different “eating rhythms” at different charging stages. Constantly charging at high power and speed can cause irreversible damage to the battery, while consistently charging at low current and slow speeds can lead to inefficient charging. Therefore, a combination of charging modes is crucial to achieving a balance between charging speed and battery life.

    Overcharging risk: Continuous high-current charging can cause battery heating, swelling, and even explosion. For example, early devices without intelligent charging modes were frequently subject to safety incidents caused by overcharging, including the occurrence of a swollen lithium battery.

    Life loss: Improper charging methods accelerate the aging of the battery’s internal chemicals, shortening the battery’s cycle life. Studies have shown that improper charging can reduce the number of cycles in lithium batteries by 20%-30%.

    Multiple Charging Modes

    Constant Current Charging Mode

    • Operating principle: Stable current fast charging

    Constant current charging is the initial stage of charging, like serving a hearty meal to a hungry battery. During this stage, the charger charges the battery at a constant current. For example, when charging a mobile phone battery, a common constant current might be 1A or 2A; electric vehicle batteries can reach tens or even hundreds of amperes.

    Control logic: The charging system detects the battery’s condition and sets an appropriate constant current value. When the battery voltage is low, the charger outputs a stable, high current, allowing the battery to absorb energy quickly. During this period, the battery voltage gradually rises with charging time.

    Key components: The key to achieving constant current charging lies in the power management chip and power devices. The power management chip monitors battery voltage, current, and other parameters in real time, and controls the conduction level of power devices (such as MOSFETs) according to preset programs to precisely regulate the charging current.

    • Applicable scenarios and advantages

    Constant current charging is primarily used during the initial stages of a battery’s charge cycle, when the battery’s charge level is low. It can quickly replenish a large amount of energy, significantly reducing charging time. For example, in fast-charging mode for electric vehicles, constant current charging can charge the battery from 10% to approximately 50% in just 30 minutes, significantly improving charging efficiency.

    Constant Current Charging

    Constant Voltage Charging Mode

    • Operating principle: Constant voltage, decreasing current

    When the battery voltage rises to a certain level (approaching full charge), the charging mode switches to constant voltage charging. During this constant voltage charging phase, the charging voltage remains constant, while the charging current gradually decreases as the battery charge increases. This is like charging the battery slowly to avoid overcharging.

    Control Logic: When the battery voltage reaches the set constant voltage value (e.g., typically 4.2V for mobile phone lithium batteries, or voltages specific to different electric vehicle batteries), the charging system automatically adjusts to maintain a constant charging voltage. As the battery charge continues to increase, the internal resistance of the battery gradually increases. According to Ohm’s law (I = U/R, where I is current, U is voltage, and R is resistance), the charging current decreases accordingly.

    Safety protection: During the constant-voltage charging phase, the power management chip continuously monitors the battery voltage and current. If an anomaly is detected (such as excessive voltage or current), the charging circuit is immediately disconnected, preventing overcharging and ensuring safe charging.

    • Important impact on battery life

    Constant-voltage charging mode prevents battery damage from overcharging, effectively extending the lithium battery life. By gradually reducing the charging current, the chemical compounds within the battery fully react, maintaining a full and stable battery charge. This also reduces issues such as overheating and minimizes damage to battery performance.

    Constant Voltage Charging

    Trickle Charging Mode

    • Operating principle: Precise energy recharge with a microcurrent

    When constant-voltage charging brings the battery’s charge level to approximately 90%-95%, trickle charging mode begins. Trickle charging uses a very low current, like a delicate after-dinner dessert, to compensate for any slight variations in charge level during the previous charging process, allowing the battery to reach a full 100% charge.

    Control Logic: At this point, the charging system reduces the charge current to tens of milliamperes or even lower, continuing to charge the battery with a low current. The power management chip precisely adjusts the trickle charge current and duration based on subtle changes in battery voltage to ensure full charge without overcharging.

    Intelligent Detection: Some advanced charging devices use algorithms to assess battery state of health and dynamically adjust trickle charge parameters. For example, for aging batteries, the trickle charge time can be extended to increase charge saturation.

    • Avoid overcharging to maintain battery health

    Trickle charging is the final step in battery charging. It effectively prevents overcharging and further protects battery performance and lifespan. Without the trickle charging stage, the battery may appear fully charged but is actually suboptimal, which can affect battery life and endurance over time.

    Trickle Charging

    Why Does Lithium Battery Charging Use Constant Current Followed by Constant Voltage?

    During lithium battery charging, the “constant current followed by constant voltage” charging method is used to balance charging efficiency and battery safety. First, during the constant current phase, the charger injects energy into the battery at a fixed current, during which the battery voltage gradually increases. This phase allows for rapid replenishment of most of the charge, resulting in high efficiency.

    When the battery voltage reaches the set maximum charging voltage (typically 4.2V for lithium batteries), the constant voltage phase begins. During this phase, the charger maintains a constant voltage while gradually reducing the current. This phase primarily replenishes the battery’s remaining capacity and prevents overcharging.

    If constant current is used throughout the entire process, the voltage may exceed the safety threshold, causing battery damage or even safety accidents. On the other hand, if constant voltage is used throughout, charging speed will be very slow. Therefore, the “constant current followed by constant voltage” method improves charging efficiency while ensuring safety, and is currently the mainstream charging method.

    How to Properly Use Charging Modes to Protect Devices?

    • Avoid overcharging

    Although modern charging devices feature intelligent charging modes, leaving your device connected to a charger for extended periods can still cause the battery to overcharge. It’s recommended to unplug the charger promptly after the device is fully charged to prevent prolonged trickle charging or overcharging, thereby extending battery life.

    • Choose high-quality charging devices

    High-quality charging devices utilize advanced power management chips and circuit designs, enabling more precise control of charging modes and parameters, ensuring a safe and efficient charging process. Whenever possible, choose genuine or certified third-party charging devices. Avoid using inferior chargers, which can damage the battery.

    • Understand your device’s charging characteristics

    Charging methods and parameter settings may vary between different device brands and models. Users can consult their device’s manual or the manufacturer to learn about optimal charging methods and precautions to better protect the battery and device.

    Use Charging Modes

    Conclusion

    The above introduces the three charging modes. Scientific charging methods can help batteries recharge efficiently and safely. Whether charging a mobile phone, an electric motorcycle, or an electric car, all three charging methods effectively mitigate damage to the battery and extend its lifespan.

    The widespread use of lithium-ion batteries has also necessitated careful attention to battery charging methods. Overcharging lithium batteries can easily lead to thermal runaway and explosions. Although battery management systems monitor battery status, we should also pay attention to lithium battery charging duration and adhere to scientific lithium battery charging methods when charging lithium batteries on a daily basis.

    Related Posts

    Latest Articles

    Dry Cell Battery

    Understanding Dry Cell Battery: Definition, Types and Storage Methods

    A dry cell battery (Dry battery) is a chemical battery that uses a paste electrolyte to generate direct current, which is different from a wet ...
    Lithium-Ion Battery Failures

    Lithium-Ion Battery Failures: Classification, Mechanisms, and Management

    Lithium-ion battery failure is a complex process. The root cause of failure is irreversible damage to the internal materials and structures of the battery, which ...
    Africa’s E-Motorcycle Boom

    Africa’s E-Motorcycle Boom: China Seizes the Opportunity

    Ethiopia has implemented one of the world's strictest bans on the import of gasoline-powered vehicles. The South African government plans to ban the sale of ...
    Battery Safety Testing

    Understanding Battery Safety Testing: Core Items and Testing Standards

    The core battery safety testing components are divided into four main areas: mechanical safety testing, electrical safety testing, environmental safety testing, thermal runaway testing, and ...
    Deep Cycle Battery

    Understanding Deep Cycle Battery: Application and Selection Guide

    Deep cycle battery is rechargeable batteries capable of long, deep discharge cycles. Unlike conventional batteries, deep cycle batteries can withstand repeated discharges to a lower ...
    Electric Tricycle Battery

    Understanding the Electric Tricycle Battery: Types, Selection, and Maintenance

    The variety of batteries used in electric tricycles is increasing. Currently, the main types of electric tricycle battery include lead-acid batteries, lithium-ion batteries, and sodium-ion ...

    Best Products

    Contact Us

    Have a specific question or request? Fill out the form below, and we’ll get back to you as soon as possible.

    Contact Form Demo
    Scroll to Top

    Talk to us!

    We’ll gladly walk you through the products during a demo and answer any questions! Just drop us a message, we’ll get back to you!

    • Whatsapp/Wechat: (+86)18925002618
    • Email: sales@atomemotor.com
    • Headquarters: Washington Business Park 7 Washington Drive Unit 25 Halfway House Midrand, Johannesburg, South Africa
    • Factory: No. 95, Zongdui Road, Daling Village, Dalingshan, Dongguan, Guangdong, China
    Contact Form Demo